อุปกรณ์ซ่อมบำรุงรถยนต์(Automotive Tools)

รหัสสินค้า: 000517

For shrinking work. With a large crowned grid face on the surface and a plain flat face on the base. This dolly, combined with a shrinking hammer and the use of heat, provides , quick and effective sh

รหัสสินค้า: 000518

Double side multi-purpose, use the edge most suited to the size and shape of a damaned flange. length 64 mm. weight 7.5 kg.

รหัสสินค้า: 000519

For rasing low spots on panels. The edge can also be used to restore the shape of a roof and reform beads.

รหัสสินค้า: 000520

For reshaping crowned panels and general panel beating. length 758 mm. weight 6.9 kg.

รหัสสินค้า: 000521

For re-shaping. Can be used in the hand to deliver a series of blows to the underside of the panel. Long crown enables use in hard to reach areas. length 120 mm. weight 8.5 kg.

รหัสสินค้า: 000522

For general reshaping of contoured panels, raising low spots and general panel beating. Length 81 mm. Weight 5.8 kg.

รหัสสินค้า: 000523

Supplied in a high quality fitted blow moulded impact resistant case. Drop forged, high carbon steel hmmers with ground and polished heads and cheeks. Hickory, octagonal section shafts. 1x : curved ut

รหัสสินค้า: 000524

weight 90 g length 210 mm.

รหัสสินค้า: 000525

Suitable for use with power on. For 6 and 12 V automotive systems only. Locates shorts, earth and open circuits. 1.7 metre heavy duty lead with spring strain relief. Super sharp tempered steel probe t

รหัสสินค้า: 000526

Suitable for use with power on. For 6, 12and 24 v automotive systems only. Locates shorts, earths and open circuits. 1.4 metre heavy duty lead with spring strain relief. Super sharp stainless steel

รหัสสินค้า: 000527

Indicates condition of battery and the out put of analternator.For automotive use on 12 V DC systems only. Magnetic back. 0.8 metre long cable leads.

รหัสสินค้า: 000528

With strong metal housing. Electrostatically powder coated. Transformer units are two chamber with copper varnished wire (heat class H). All tested at 4500 volts before fitting.With automatic fuse pro

รหัสสินค้า: 000529

Retracting brade caliper pistons can be used with 1/2"square drive ratchet and 21 mm hex wrench or spanner and is sutitable for use on most cars and motorcycles. Constructed from hardened steel

รหัสสินค้า: 000530

Designed for import cars with brake shoe hold down clips. Removes and installs brade clip and nail on brake shoes in seconds. Impact resistant square section handle for secure grip even when greasy. o

รหัสสินค้า: 000531

Paralel pin punches for the removal of brake caliper pad retaining pins. 6.0 mm. diameter punch cuses a pilot tip to aid location in gollow pins used on GM/Vauxhall calipers. Overall length:165 mm. Di

รหัสสินค้า: 000532

Removes and replaces T-slot anti-rattle spring washers found in drum brake assemblies. Hardened and tempered carbon steel shank and cup with oxidised finish for protection against corrosion, bevelled

รหัสสินค้า: 000533

Fully hardened and chromed carbon steel slide hammer with a 1.2 kg. weight. Slide hammer design for removing bearings from blind housings. Suitable for use where ashaft or other solid surface is not

รหัสสินค้า: 000534

6 piece set contents: 1x t-bar. 1x hammer 1.2 kg. 1x 3 jaw internal puller 15-30 mm. 1x 3 jaw internal puller 30-80 mm. 1x 3 jaw external puller 15-80 mm. 1x blow moulded case.

รหัสสินค้า: 000535

SWP9-Steering Wheel Suitable for GM Ford and chrysler vehicles. Also suitable for rmoveing pulleys and fly wheels. Contents: 1x yoke 1x thrust bolt. 1x thrust cap. 2x 75 mm. screws 2x 90 mmscrews 1x p

รหัสสินค้า: 000536

Hardened steel screws and cast steel claws. 2 legged Central hexaonal drive with wrap over coil claws which can be reversed for spreading applications. Suitable for use on cars and light commercial ve